Honda H22 Stage 2 Camshafts - Forced Induction Spec

BC0031-2

NEW PROFILE DESIGN - Short duration profile builds cylinder pressure by reducing overlap, high lift for more air intake. Requires kit BC0030 or BC0030S.

Rocker Ratio: 1.55:1 mid, 1.5:1 sec, 1.45:1 pri.

IMPORTANT INFORMATION: Do not use an impact wrench/gun to torque cam gear to the camshaft. Torque cam gear bolt to 22 ft lbs. Aftermarket cams are chilled cast and require less torque than the OEM/factory steel cams. If using aftermarket gears, make certain the cam gear bolt can engage 3 to 4 threads into the body of the cam. Thicker gears will cause the cam bolt to only engage the threads in the snout, increasing the chance of breakage.

subscribe to our newsletter for deals